CAB · Label printer
CAB SQUIX 4 MT
Because of high heat energy while printing and the electrostatic charge of the materials the ribbon may stick with the textile tape like fabric labels. A separator guarantees reliable separation
Runs Raptool WMS and other Raptool apps in the Raptool Client, with full access to the scanner, camera, RFID and printers, online and offline. Scanner apps
Specifications
Specifications
- Initial print Distance to locating edge mm
- centered
- Finishing Roll diameter mm max.
- 205
- Finishing Core diameter mm
- 38.1 - 76
- Finishing Winding
- outside or inside
- Label Width mm
- 4 - 110
- Label Height no label backfeed 2) mm at least
- 4
- Label Height label backfeed 2) mm at least
- 6
- Label Thickness mm
- 0.03 - 0.6
- Liner Width mm
- 9 - 114
- Liner Thickness mm
- 0.03 - 0.16
- Continuous Width mm
- 9 - 114
- Continuous Thickness mm
- 0.03 - 0.5
- Continuous Weight (cardboard) g/m 2 max.
- 300
- Shrink tube Width ready for use mm max.
- 114
- Shrink tube Width continuous, pressed mm
- 4 - 85
- Shrink tube Thickness mm max.
- 1.1
- Ribbon 3) Color layer
- outside or inside
- Ribbon Roll diameter mm max.
- 80
- Ribbon Core diameter mm
- 25.4
- Ribbon Length m max.
- 600
- Ribbon Width mm
- 25 - 114
- Width x Height x Depth mm
- 252 x 288 x 460
- Weight kg
- 10
- Transmissive sensor detecting
- labels, punch marks, materials ending, print marks on translucent materials
- Reflective sensor from below or top detecting
- labels, materials ending, print marks on non-translucent materials
- Sensor distance to locating edge centered position mm
- 0 - 55
- Material passage mm max.
- 2 (5 are an option)
- Ethernet 10/100 Mbit/s
- IPv4 / IPv6 static IP / DHCP · IEEE 802.1X
- Voltage
- 100 - 240 VAC, 50/60 Hz, PFC
- Power consumption
- <10 W in standby / 100 W in typical operation / max. 200 W
- Temperature / humidity: Operation
- +5 - 40°C / 10 - 85% not condensing
- Temperature / humidity: Stock
- 0 - 60°C / 20 - 85% not condensing
- Temperature / humidity: Transport
- –25 - 60°C / 20 - 85% not condensing
- Approvals
- CE, UKCA, FCC Class A, ICES-3, cULus, CB, CCC, BIS, BSMI, KC-Mark, Mexico Reg.
- Color LCD touchscreen Diagonal ″
- 4.3
- Color LCD touchscreen Resolution Width x Height px
- 272 x 480
- Material Weight (cardboard) gr/m 2
- 60-300
- Cutting length mm at least
- 5
- Material passage mm max.
- 2.5
- Performance* cuts/min
- 100
- Printing stops if
- no final cutter position
- Operated with basic and peel-off units
- SQUIX 4.3, SQUIX 4 SQUIX 4.3P, SQUIX 4P SQUIX 4.3 M, SQUIX 4 M SQUIX 4.3 MP, SQUIX 4 MP SQUIX 4.3 MT, SQUIX 4 MT
- Perforation : Width of off-cuts mm
- 0.5
- Material: Width mm max.
- 85
- Material: Weight (cardboard) gr/m 2
- 60 - 300
- Material: Thickness mm
- 0.05 - 1.1
- Stacker providing a cutter
- ST400 M
- Operated with
- SQUIX 4.3 M, SQUIX 4 M, SQUIX 4.3 MT, SQUIX 4 MT
- Material Width mm
- 20 - 100
- Material Weight (cardboard) gr/m 2
- 60 - 300
- Material Thickness mm
- 0.05 - 0.8
- Cutting length mm
- 20 - 150
- Material passage mm max.
- 1.2
- Printing stops if
- no final cutter position, paper jam, cover open, limit of collecting
- Limit of collecting mm max.
- 100
- Roll diameter mm max.
- 300
- Core diameter mm
- 38.1
- Core diameter mm if an adapter is in use
- 76
- Winding
- outside or inside
Send a request
Get a quote for the SQUIX 4 MT
Tell us where you are and what you need.
Raptool does NOT sell hardware. We are a pure software company. The devices are sold by our hardware partners around the world. Your request goes straight to a partner in your country, and they send you the quote.
