CAB · Label printer
CAB SQUIX 4 M
The label printer with centered material guide.
- ScanningCC200-SQ
Runs Raptool WMS and other Raptool apps in the Raptool Client, with full access to the scanner, camera, RFID and printers, online and offline. Scanner apps
Specifications
Specifications
- Initial print Distance to locating edge mm
- centered
- Finishing Roll diameter mm max.
- 205
- Finishing Core diameter mm
- 38.1 - 76
- Finishing Winding
- outside or inside
- Label Width mm
- 4 - 110
- Label Height no label backfeed 2) mm at least
- 3
- Label Height label backfeed 2) mm at least
- 4
- Label Height label backfeed, peel-off mm at least
- 6
- Label Thickness mm
- 0.03 - 0.6
- Liner Width mm
- 9 - 114
- Liner Thickness mm
- 0.03 - 0.16
- Continuous Width mm
- 9 - 114
- Continuous Thickness mm
- 0.03 - 0.50
- Continuous Weight (cardboard) g/m 2 max.
- 300
- Shrink tube Width ready for use mm max.
- 114
- Shrink tube Width continuous, pressed mm
- 4 - 85
- Shrink tubes Thickness mm max.
- 1.1
- Hose continuous, round or oval max. height mm
- 5
- Ribbon 3) Color layer
- outside or inside
- Ribbon Roll diameter mm max.
- 80
- Ribbon Core diameter mm
- 25.4
- Ribbon Length m max.
- 600
- Ribbon Width mm
- 25 - 114
- Outside diameter mm max.
- 142
- Core diameter mm
- 40
- Winding
- outside
- Width x Height x Depth mm
- 252 x 288 x 460
- Weight kg
- 10
- Transmissive sensor detecting
- labels, punch marks, materials ending, print marks on translucent materials
- Reflective sensor from below or top detecting
- labels, materials ending, print marks on non-translucent materials
- Sensor distance to locating edge centered position mm
- 0 - 55
- Material passage mm max.
- 2 (5 are an option)
- Ethernet 10/100 Mbit/s
- IPv4 / IPv6 static IP / DHCP · IEEE 802.1X
- Voltage
- 100 - 240 VAC, 50/60 Hz, PFC
- Power consumption
- <10 W in standby / 100 W in typical operation / max. 200 W
- Temperature / humidity: Operation
- +5 - 40°C / 10 - 85% not condensing
- Temperature / humidity: Storage
- 0 - 60°C / 20 - 85% not condensing
- Temperature / humidity: Transport
- –25 - 60°C / 20 - 85% not condensing
- Approvals
- CE, UKCA, FCC Class A, ICES-3, cULus, CB, CCC, BIS, BSMI, KC-Mark, Mexico Reg.
- Operated with basic and peel-off units
- SQUIX 4.3, SQUIX 4 SQUIX 4.3P, SQUIX 4P SQUIX 4.3 M, SQUIX 4 M SQUIX 4.3 MP, SQUIX 4 MP SQUIX 4.3 MT, SQUIX 4 MT
- Controls
- no final cutter position, cover off cutter
- Label height mm max.
- 100
- Operated with basic and peel-off units
- SQUIX 4.3 M, SQUIX 4 M SQUIX 4.3 MP, SQUIX 4 MP SQUIX 4.3 MT, SQUIX 4 MT
- Material Weight (cardboard) gr/m 2
- 60-300
- Cutting length mm at least
- 5
- Material passage mm max.
- 2.5
- Performance* cuts/min
- 100
- Printing stops if
- no final cutter position
- Perforation : Width of off-cuts mm
- 0.5
- Material: Width mm max.
- 85
- Material: Weight (cardboard) gr/m 2
- 60 - 300
- Material: Thickness mm
- 0.05 - 1.1
- Stacker providing a cutter
- ST400 M
- Operated with
- SQUIX 4.3 M, SQUIX 4 M, SQUIX 4.3 MT, SQUIX 4 MT
- Material Width mm
- 20 - 100
- Material Weight (cardboard) gr/m 2
- 60 - 300
- Material Thickness mm
- 0.05 - 0.8
- Cutting length mm
- 20 - 150
- Material passage mm max.
- 1.2
- Printing stops if
- no final cutter position, paper jam, cover open, limit of collecting
Send a request
Get a quote for the SQUIX 4 M
Tell us where you are and what you need.
Raptool does NOT sell hardware. We are a pure software company. The devices are sold by our hardware partners around the world. Your request goes straight to a partner in your country, and they send you the quote.
