CAB · Label printer
CAB MACH 4S
MACH 4S offers all the features of a high class industrial printer with a wide application range.
Runs Raptool WMS and other Raptool apps in the Raptool Client, with full access to the scanner, camera, RFID and printers, online and offline. Scanner apps
Specifications
Specifications
- Label height from mm
- 12
- Cutting length from mm
- 12
- Gap height up to mm
- 2.5
- Cuts/min, without material up to
- 100
- Stop print job when
- final cutter position has not been reached
- Material feed
- centered
- Start of printing Distance to locating edge mm
- centered
- Packing Roll diameter up to mm
- 205
- Packing Core diameter mm
- 38.1 - 76
- Packing Winding
- outside or inside
- Labels Width mm
- 5 - 116
- Labels Height excl. label backfeed from mm
- 5
- Labels Height incl. label backfeed from mm
- 12
- Labels Peel-off, single cut from mm
- 20
- Labels Thickness mm
- 0.03 - 0.6
- Liner material Width at core diameter 38 mm mm
- 9 - 120
- Liner material Width at core diameter 76 mm mm
- 25 - 120
- Liner material Thickness mm
- 0.03 - 0.16
- Continuous material Width at core diameter 38 mm mm
- 5 - 120
- Continuous material Width at core diameter 76 mm mm
- 25 - 120
- Continuous material Thickness mm
- 0.03 - 0.5
- Continuous material Weight (cardboard) up tp g/m 2
- 180
- Shrink tubes Width ready-for-use up to mm
- 120
- Shrink tubes Thickness up to mm
- 1.1
- Ribbon 2) Ink side
- outside or inside
- Ribbon Roll diameter up to mm
- 72
- Ribbon Core diameter mm
- 25.4
- Ribbon Variable length up to m
- 360
- Ribbon Width mm
- 25 - 114
- Width x Height x Depth mm
- 240 x 317 x 435
- Weight kg
- 6
- Gap sensor for
- labels or punch marks and end of material, print marks on transparant materials
- Reflective sensor reflex from below for
- labels and end of material, print marks on non-transparent materials
- Distance of sensor from centre to locating edge gap mm
- centered or shifted by 10 mm to the left
- Distance of sensor from centre to locating edge reflex from below mm
- adjustable from centre by 56 mm to the left or by 10 mm to the right
- Material passage up to mm
- 2
- Processor 32 bit clock rate MHz
- 800
- Main storage (RAM) MB
- 256
- Data storage (IFFS) MB
- 50
- Plug-in for SD memory card (SDHC, SDXC) up to GB
- 512
- Ethernet 10/100 Mbit/s
- IPv4 / IPv6 static IP / DHCP · IEEE 802.1X
- 2 x USB host on the back of a unit
- Service Key, USB stick, USB WLAN stick, USB WLAN stick with a rod antenna, keyboard, barcode scanner, external control panel
- Charging / power
- 100 - 240 VAC, 50/60 Hz, PFC
- Power consumption
- Standby < 10 W / typical 80 W / max. 200 W
- Temperature/humidity: Operation
- +5 - 40 °C / 10 - 85 % not condensing
- Temperature/humidity: Stock
- 0 - 60 °C / 20 - 85 % not condensing
- Temperature/humidity: Transport
- –25 - 60 °C / 20 - 85 % not condensing
- Approvals
- CE, UKCA, FCC Class A, ICES-3, cULus, CB, CCC, BIS, BSMI, KC-Mark, Mexico Reg. → BIS not provided for 4.3 S/C types
- Colored LCD touch display Screen diagonal “
- 4,3
- Colored LCD touch display Resolution Width x Height px
- 480 x 272
- External rewinder
- ER4/210
- Material width up to mm
- 120
- Roll diameter up to mm
- 210
- Core diameter mm
- 40 in cases of a rewind axle or a cardboard core 76 in cases of a cardboard core and an adapter
- Winding
- outside or inside
Send a request
Get a quote for the MACH 4S
Tell us where you are and what you need.
Raptool does NOT sell hardware. We are a pure software company. The devices are sold by our hardware partners around the world. Your request goes straight to a partner in your country, and they send you the quote.
